Hi all, We are experiencing a strange behavior with one of our MX80 routers, it has stopped to respond SNMP requests (snmpwalk or snmpbulkwalk). I have tried to restart the snmp protocol and the mib-process but no luck, it responds once and then it stops again. There's nothing on snmpd log or anything like that.
The only way it was possible get some response from it was to set the stats-cache-lifetime to 30 seconds. Has anyone been through it ? I've been through the Juniper SNMP Troubleshooting page but I've found nothing about this issue. Here's the config: set snmp location SANDIEGO set snmp contact "[email protected]" set snmp stats-cache-lifetime 30 set snmp community CLI_RO authorization read-only set snmp community CLI_RO clients X.X.X.X/32 set snmp traceoptions flag all Thanks in advance. Best regards, Caio _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
