monitor traffic interface ge-0/0/0 size XXXX no-resolve layer2-headers extensive
-- Tim On Mon, Nov 28, 2016 at 12:43 PM, Alex K. <[email protected]> wrote: > Hello everyone, > > By any chance - is there an equivalent for Ciscos' "debug ip packet" > command in Juniper? > > I'm fully aware that there is a complete distinction between forwarding > layer and control layer, in those devices - But, I'm taking specifically > about traffic TARGETING the box itself. > > I'm troubleshooting a strange behavior by Juniper EX line. It's a compex > topology but the issue is very simple: under certain circumstances, an EX > stop responding even to pings to its own addresses, even from directly > connected interfaces. > > I'm fully aware that I can mirror a port on those machines (and such), but > mirroring alone, will not answer the million dollar question - why? > > Since there is no doubt that packets are reaching the box (packets don't > leak from a directly connected cable, with PC on its other end) - I was > hoping, Juniper might have provided us with a trace option, for following > the packet inside the box? > > Anyone know such trace option? > > > Any suggestions will be welcomed. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
