Hi, I have following questions regarding Ethernet frame delay measurements:
1) Why doesn't "monitor ethernet delay-measurement" support "rapid" option? According to command reference for Junos 16.2 for MX series(http://www.juniper.net/techpubs/en_US/junos/topics/reference/command-summary/monitor-ethernet-delay-measurement.html) minimum "wait" interval is 1 second. 2) Is it possible to configure CFM two-way delay-measurements database size in a way that "show oam ethernet connectivity-fault-management delay-statistics maintenance-domain <maintenance-domain-name> maintenance-association <maintenance-association-name>" command displays for example 10 measurements instead of 100 and calculates measurements summary("Average two-way delay", "Average two-way delay variation") based on those 10 measurements? At the moment one can specify "count", but summary is still calculated based on 100 measurement results. For example here I specify "count 5": Remote MAC address: 00:19:e2:b1:1d:c0 Delay measurement statistics: Index One-way delay Two-way delay (usec) (usec) 1 4920 2 4916 3 4914 4 4956 5 4919 Average two-way delay : 4888 usec Average two-way delay variation: 34 usec Best case two-way delay : 3654 usec Worst case two-way delay : 4956 usec As seen above, "Average two-way delay" or "Average two-way delay variation" are not calculated based on those 5 measurement results. 3) Is there a way to keep two-way delay-measurements running as a daemon? As much as I searched, this can only be triggered with "monitor ethernet delay-measurement" command. thanks, Martin _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
