The answer is: check the cabling. When its dark in the cabinet and you're rearranging DACs from one layout to another something is bound to get plugged in wrong.
The steady blinking seems to be a feature of the QFX5100-48T. Any active port configured as a VCP seems to be doing it. The VCPs on the 24Q blink according to traffic levels. Jonathan From: juniper-nsp <[email protected]> on behalf of Jonathan Call <[email protected]> Sent: Wednesday, January 11, 2017 2:41 PM To: [email protected] Subject: [j-nsp] Oddness in a QFX VCP trunk I have four QFX set up in a lab to do some Virtual Chassis testing. The two REs are QFX5100-24Q and the two linecards are QFX5100-48T virtual-chassis { preprovisioned; member 0 { role routing-engine; serial-number TB3714010XXX; } member 1 { role routing-engine; serial-number TB3714010XXX; } member 2 { role line-card; serial-number TR0214480XXX; } member 3 { role line-card; serial-number TR0214500XXX; } } For whatever reason the links between fpc2 and fp3 are not working: fpc0: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 1/0 Configured 5 Up 40000 1 vcp-255/1/0 1/1 Configured 5 Up 40000 1 vcp-255/1/1 1/2 Configured 6 Up 40000 3 vcp-255/0/50 1/3 Configured 6 Up 40000 3 vcp-255/0/51 fpc1: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 1/0 Configured 5 Up 40000 0 vcp-255/1/0 1/1 Configured 5 Up 40000 0 vcp-255/1/1 1/2 Configured 6 Up 40000 2 vcp-255/0/50 1/3 Configured 6 Up 40000 2 vcp-255/0/51 fpc2: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 0/50 Configured 5 Up 40000 1 vcp-255/1/2 0/51 Configured 5 Up 40000 1 vcp-255/1/3 0/52 Configured -1 Up 40000 0/53 Configured -1 Up 40000 fpc3: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 0/50 Configured 5 Up 40000 0 vcp-255/1/2 0/51 Configured 5 Up 40000 0 vcp-255/1/3 0/52 Configured -1 Up 40000 0/53 Configured -1 Up 40000 Another curious thing is that all of the VC ports on fpc2 and fpc3 are all blinking at a steady rate. This seems to be wired up according to Juniper's Virtual Chassis recommendations so what did I miss? Thanks, Jonathan _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
