Hi Vincent, > Vincent Bernat > Sent: Friday, January 27, 2017 2:02 PM > > Hey! > > I am using some QFX as route reflectors and would like to use BGP add-path > feature. The documentation says that QFX is a supported platform[0] while > the feature explorer says no QFX has support for that[1]. > > [0]: > http://www.juniper.net/techpubs/en_US/junos16.1/topics/example/bgp- > add-path.html > [1]: https://pathfinder.juniper.net/feature-explorer/feature- > info.html?fKey=3294&fn=For+internal+BGP+(IBGP),+advertise+multiple+pat > hs+to+a+destination > > I have upgraded some QFX to 16.1R3 but there is no difference with > 14.1X53-D40: add-path is an hidden command and only "receive" is available > ("send" is not accepted): > > set protocols bgp group batman family inet unicast add-path send ... > > I have also tried on MX104 running 14.1R8. Feature explorer says this should > be supported since 13.2R2. But I am in the exact same situation: > add-path is a hidden command and only "receive" is available. >
Is the RR use in MPLS-VPNs environment or just pure L3-IPv4/6 environment? If it's MPLS-VPNs environment, then you don't need add-path. Also if ORR is supported on QFX by any chance you might want to try that instead of add-path. Does it take the below? set protocols bgp group batman optimal-route-reflection adam netconsultings.com ::carrier-class solutions for the telecommunications industry:: _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
