"Valentini, Lucio" writes: >The question >is, what do the other commands do ? Juniper does not seem to provide examples. >I never >see the time stamp in the ping response anyway.
These config knobs set sysctl variables in the FreeBSD kernel to instruct it on how to behave. The values are then propagated from the kernel to the PFEs as needed. You're right, they are woefully underdocumented. Here's some info on them: set system no-multicast-echo sysctl: net.inet.icmp.bmcastecho meaning: do not respond to ICMP packets sent to IP broadcast addresses set system no-redirects sysctl: net.inet.ip.redirect meaning: do not send IP redirects set system no-ping-record-route sysctl: net.inet.ip.ip_rr (JUNOS specific, I think) meaning: do not add record route data to ip packets (not ping specific) set system no-ping-time-stamp sysctl: net.inet.ip.ip_ts (JUNOS specific, I think) meaning: do not add timestamps to ip packets (not ping specific) Despite the names, the last two are _not_ ping/icmp related, but just turn off ip options processing for these two options. The brevity of the names makes me fairly sure they are JUNOS additions. I'll get these added to the docs. Thanks, Phil _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
