Hi folks, I am trying to get an ACX500 to act as PTP master clock, for timing of E1 over MPLS.
according to the datasheets: https://www.juniper.net/assets/kr/kr/local/pdf/datasheets/1000397-en.pdf The ACX500, ACX500-O, and ACX500-O-PoE also provide an integrated GPS receiver and can act as grandmaster (GM) clock for a distributed PTP implementation, making them an ideal choice for the aggregation of small cell traffic when the backhaul is transported over the Internet. Does anyone have a succesful configuration for this? I am also struggling to find information of how to utilise the antenna port on the ACX? Any help is appreciated. -- Carsten Pettersson, Senior Network Specialist, IP www.globalconnect.dk | [email protected] | tel: +45 3125 6595 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
