Hi everyone, Does anyone have an idea, why vMX SR-IOV vlan-tagging isn't working? If I use "unit 0" without any VLANs configured on the interface everything is okay.
Is it possible to be something related to the NIC which I am using? Also, do I need to disable some of the following feature ( or all of them )? rx-vlan-offload: on tx-vlan-offload: on rx-vlan-filter: on *0a:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)* * Subsystem: Intel Corporation Ethernet Server Adapter X520-2* * Physical Slot: 2* * Flags: bus master, fast devsel, latency 0, IRQ 68* * Memory at e7080000 (64-bit, non-prefetchable) [size=512K]* * I/O ports at 5020 [size=32]* * Memory at e7304000 (64-bit, non-prefetchable) [size=16K]* * Capabilities: [40] Power Management version 3* * Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+* * Capabilities: [70] MSI-X: Enable+ Count=64 Masked-* * Capabilities: [a0] Express Endpoint, MSI 00* * Capabilities: [100] Advanced Error Reporting* * Capabilities: [140] Device Serial Number 00-1b-21-ff-ff-89-48-f4* * Capabilities: [150] Alternative Routing-ID Interpretation (ARI)* * Capabilities: [160] Single Root I/O Virtualization (SR-IOV)* * Kernel driver in use: ixgbe* * Kernel modules: ixgbe* _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
