This page [1] shows that the recommended version is 15.1R6, but this page [1] says 14.1R7 for the MX104. I know the MX104's PPC RE cannot use the SMP kernel included in 15.1, but I understand an older kernel will be installed for these PPC devices.
I'm currently running 14.2R6.5 but I am having some problems with high CPU sporadically that doesn't necessarily correlate to any periods of high traffic, etc. Every 6 hours, the RE CPU climbs until it reaches ~60% (sometimes higher into the ~80% range) and then falls back down to ~5%. I never saw this behavior when we were running 13.x with the same traffic levels. "show chassis routing-engine" shows most of the CPU usage at this time is used by the kernel. "show system process extensive" shows that chassisd is the main hog. I suppose my question is.. what Junos release appears to be the most stable for the MX104 platform? Not doing anything special here - a few eBGP peers, simple routing policy, etc. Thanks, Josh [1] https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476&actp=METADATA [2] http://www.juniper.net/support/downloads/?p=mx104#sw _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
