Hi Jason, Thanks for the response, This happened to us irrespective of version, some switches were from 12.3.r9 to 15.1.r2.9 and some were from 15.1.r2.9 to 15.1.R6s2.1 as far as I remember.
Same thing here with the JTAC support, they say go to the site and upgrade using USB if the device fails during upgrade. They don't understand practical difficulties when you have frequent failures. Best Regards Kamal On Wed, Sep 27, 2017 at 11:58 PM, Jason Healy <[email protected]> wrote: > On Sep 27, 2017, at 1:56 AM, Kamal Dissanayaka <[email protected]> > wrote: > > > > The issue with this is remote upgrades. Remote upgrades fails randomly > and > > some has to visit the sit to fix it. Is there any way fix it ? > > What version were you running previously? We bumped all of our 4200s from > 12.x to 15.x and got badly burned with switches that didn't come up. > > JTAC told us (after the fact) that we needed to be on the VERY LATEST 12 > series before making the upgrade or else there might be 'issues'. Ended up > having to do a format reinstall from USB on about a third of the switches. > > Jason _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
