My working lsys-based ldp l2circuit (aka martini) config... r2@lab-mx104:r2> show configuration protocols l2circuit | display set set logical-systems r2 protocols l2circuit neighbor 1.1.255.6 interface lt-0/1/0.210 virtual-circuit-id 1
r2@lab-mx104:r2> show configuration interfaces lt-0/1/0.210 | display set set logical-systems r2 interfaces lt-0/1/0 unit 210 encapsulation ethernet-ccc set logical-systems r2 interfaces lt-0/1/0 unit 210 peer-unit 102 r2@lab-mx104:r2> show route 1.1.255.6 protocol ldp inet.3: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.255.6/32 *[LDP/9] 2w4d 14:46:32, metric 1 to 1.1.7.2 via lt-0/1/0.27, Push 305152 > to 1.1.1.2 via lt-0/1/0.3, Push 304096 r2@lab-mx104:r2> show l2circuit connections brief | find Neigh Neighbor: 1.1.255.6 Interface Type St Time last up # Up trans lt-0/1/0.210(vc 1) rmt Up Oct 2 23:16:46 2017 1 ------------------------------------------------------ r6@lab-mx104:r6> show configuration protocols l2circuit | display set set logical-systems r6 protocols l2circuit neighbor 1.1.255.2 interface lt-1/1/0.611 virtual-circuit-id 1 r6@lab-mx104:r6> show configuration interfaces lt-1/1/0.611 | display set set logical-systems r6 interfaces lt-1/1/0 unit 611 encapsulation ethernet-ccc set logical-systems r6 interfaces lt-1/1/0 unit 611 peer-unit 116 r6@lab-mx104:r6> show route 1.1.255.2 protocol ldp inet.3: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 1.1.255.2/32 *[LDP/9] 2w4d 16:13:27, metric 1 > to 1.1.6.1 via lt-0/1/0.63, Push 304048 to 1.1.11.1 via lt-0/1/0.67, Push 305136 r6@lab-mx104:r6> show l2circuit connections brief | find Neigh Neighbor: 1.1.255.2 Interface Type St Time last up # Up trans lt-1/1/0.611(vc 1) rmt Up Oct 2 23:16:46 2017 1 -Aaron _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp