thanks, and my second question is can a use ERPS on QFX, because the docs says that "Ethernet ring protection switching uses connectivity fault management daemon"
i`m little confused On Mon, Oct 23, 2017 at 1:07 PM, Krasimir Avramski <[email protected]> wrote: > CFM is not supported on QFX family. > ACX5K supports this feature. > > Best Regards, > Krasi > > On 23 October 2017 at 12:39, Vasil Kanev <[email protected]> wrote: > >> Hi there, >> >> On an QFX5100 VC i`m trying to configure OAM CFM but when i try to check >> status i got this: >> >> error: the ethernet-connectivity-fault-management subsystem is not >> running >> >> Here is my config: >> >> {master:0}[edit protocols oam ethernet connectivity-fault-management] >> action-profile LINK_DOWN { >> default-actions { >> interface-down; >> } >> } >> maintenance-domain lab { >> level 7; >> name-format character-string; >> maintenance-association labMA { >> continuity-check { >> hold-interval 1; >> } >> mep 999 { >> interface xe-0/0/0.0 vlan 66; >> direction down; >> auto-discovery; >> } >> } >> } >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
