This is on MX boxes running 15.1R6 I suspect I am going to end up implementing a hack to get this working !
On Wed, Oct 25, 2017 at 4:16 AM, Alain Hebert <[email protected]> wrote: > Hi, > > Depending of your relation with your local JNP resellers. > > You could get vMX, vQFX and vSRX and build yourself a lab using (ESXi in > our case). > > In the past vMX wasn't working correctly for EVPN but 17.x is working > with our MX240+vMX+QFX lab. > > But we're staying away from LS since we had a series of crashes in 16.x. > > TLDR: Good luck =D > > ----- > Alain Hebert [email protected] > PubNIX Inc. > 50 boul. St-Charles > P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 > Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443 > > On 10/24/17 10:47, Aaron Gould wrote: >> >> Since you mentioned it.... Evpn in lsys ? I don't think that works. If >> so please tell me it does so I can try it. I really would like to know if I >> can run EVPN in LSYS on MX104... let me know if I need to simply change to a >> different version of JUNOS and I'll do it. >> >> [edit] >> r2@lab-mx104:r2# set routing-instances test instance-type ? >> Possible completions: >> forwarding Forwarding instance >> l2backhaul-vpn L2Backhaul/L2Wholesale routing instance >> l2vpn Layer 2 VPN routing instance >> layer2-control Layer 2 control protocols >> mpls-internet-multicast Internet Multicast over MPLS routing instance >> no-forwarding Nonforwarding instance >> virtual-router Virtual routing instance >> virtual-switch Virtual switch routing instance >> vpls VPLS routing instance >> vrf Virtual routing forwarding instance >> [edit] >> >> [edit] >> r2@lab-mx104:r2# run show version >> Hostname: lab-mx104 >> Model: mx104 >> Junos: 14.2R7.5 >> >> -Aaron >> >> >> > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
