It won't work on the M10i, but when I get the MX104 turned up, I'm going
to try this!
Just to follow up, I did manage to get Cacti graphing the firewall
counters, so I now have nice graphs, and can see that we are about 25%
IPv6 now.
Thanks everyone!
On 2017-10-31 05:21 PM, Daniel Verlouw wrote:
Tim,
On Tue, Oct 31, 2017 at 9:00 PM, Tim St. Pierre
<[email protected]> wrote:
Can anyone suggest a simple way to measure interface traffic by address
family? Currently, I'm measuring interface traffic using SNMP queries and
just grabbing the in / out bit byte counters.
check out
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/forwarding-class-accounting-edit-interfaces.html
(only on MX/MPC)
IIRC there's a separate MIB too.
--Daniel.
--
--
Tim St. Pierre
System Operator
Communicate Freely
289-225-1220 x5101
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
