As some have said, EX2300 is the current platform. I am using EX2200C. Pretty much the only feature wise decent cheap(ish) fanless switch in existence if you ask me. As a L2 switch, no issues, POE works fine. No BGP support, because please buy a higher model, but other than that, OSPF, PIM, routing instances, fw filters, IPv6, VRRP, GRE tunnels, all working fine. GRE broken in routing instances though on latest JunOS for it. This is as far as I've gone with protocol support. Solid box. Feels no different to 3200/4200 bar spec and features obviously. Did not check dot1x or DHCP helpers which may be of use for branch or campus.
Thanks, Wojciech Original Message From: [email protected] Sent: 8 December 2017 5:41 p.m. To: [email protected] Subject: [j-nsp] What is your experience with the EX2200 We're considering purchasing these switches for our branch offices. Our needs include PoE, and basic routing functionality. What's been your experience with these switches? -- Dan White BTC Broadband Network Admin Lead Ph 918.366.0248 (direct) main: (918)366-8000 Fax 918.366.6610 email: [email protected] http://www.btcbroadband.com _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
