Hey there, General question - MX204-IR, for example, claims no RIB/FIB scale restrictions. While I’m sure with that claim, RIB scale is limited to the amount of physical memory available on the box, I’m not sure what the physical limits are around the FIB. My understanding is that it’s Trio Gen 3 based, but to that, I don’t actually know enough about the architecture yet to be sure.
Thanks! > On Dec 21, 2017, at 6:19 AM, <[email protected]> > <[email protected]> wrote: > > Hi folks, > > I have this large scale rollout and while doing scaling testing and Juniper > recommendations will get you some confidence, I'd like to understand where > we land on the graph in comparison with other operators (can't get this info > from Juniper folks unfortunately). > But we can build our own anonymous public database right here on the list. > So what I'd like to collect from you all is: > > Junos code version: > Number of VRFs: > Number of destinations (total or average per VRF): > Output from: request pfe execute target fpc0 command "show jnh 0 pool" (+ > type of card this was executed on) > - this output will tell you where you are at with regards to your > next-hop memory utilization (whether you are within the pre-allocated 2+2M > or already borrowing something from the shared pool) > > You can contact me on or off list and I shall publish a summary graph > (anonymous of course) > > Thank you very much. > > adam > > netconsultings.com > ::carrier-class solutions for the telecommunications industry:: > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
