Thanks for the reply. Can you please help me how can I check and correct this ?
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Tue, Jan 30, 2018 at 11:25 AM, Emille Blanc <[email protected] > wrote: > You might want to check the MTU of the path, or ensure that pmtu is > enabled. > It looks like you're using a redundant ethernet interface (reth). If > you're using a non-standard MTU, make sure it is set correctly for its > member interface(s). > > ________________________________________ > From: juniper-nsp [[email protected]] On Behalf Of > sameer mughal [[email protected]] > Sent: Monday, January 29, 2018 8:20 PM > To: [email protected] > Subject: Re: [j-nsp] SRX 550 BGP Flapping > > I have seen hold time error. what will be the fix on this issue? > > show bgp neighbor xx.xx.xx.xx > Peer: xx.xx.xx.xx+179 AS xxxx Local: xx.xx.xx.xx+56228 AS xxxx > Type: External State: Established Flags: <Sync> > Last State: OpenConfirm Last Event: RecvKeepAlive > Last Error: Hold Timer Expired Error > Export: [ IMPORT-LAN-INTO-BGP ] Import: [ Reject-BGP ] > Options: <Preference LocalAddress AuthKey PeerAS Refresh> > Options: <AdvertisePeerAs> > Authentication key is configured > Local Address: xx.xx.xx.xx Holdtime: 90 Preference: 170 > Number of flaps: 30 > Last flap event: HoldTime > Error: 'Hold Timer Expired Error' Sent: 30 Recv: 0 > Peer ID: xx.xx.xx.xx Local ID: xx.xx.xx.xx Active Holdtime: 90 > Keepalive Interval: 30 Group index: 0 Peer index: 0 > BFD: disabled, down > Local Interface: reth2.0 > NLRI for restart configured on peer: inet-unicast > NLRI advertised by peer: inet-unicast > NLRI for this session: inet-unicast > Peer supports Refresh capability (2) > Stale routes from peer are kept for: 300 > Peer does not support Restarter functionality > Peer does not support Receiver functionality > Peer does not support LLGR Restarter or Receiver functionality > Peer supports 4 byte AS extension (peer-as xx.xx.xx.xx) > Peer does not support Addpath > Table inet.0 Bit: 10000 > RIB State: BGP restart is complete > > <https://www.avast.com/sig-email?utm_medium=email&utm_ > source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> > Virus-free. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_ > source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > On Tue, Jan 30, 2018 at 9:14 AM, sameer mughal <[email protected]> > wrote: > > > Hi, > > Can anyone help me on this bgp flapping issue? > > > > show bgp summary > > Groups: 1 Peers: 1 Down peers: 0 > > Table Tot Paths Act Paths Suppressed History Damp State > > Pending > > inet.0 > > 37 31 0 0 0 > > 0 > > Peer AS InPkt OutPkt OutQ Flaps Last > > Up/Dwn State|#Active/Received/Accepted/Damped... > > xx.xx.xx.xx 9541 86 70 0 *30 * > > 28:28 31/37/36/0 0/0/0/0 > > > > {primary:node0} > > > > Peer: xx.xx.xx.xx +179 AS 9541 Local: xx.xx.xx.xx +56228 AS 64520 > > Type: External State: Established Flags: <Sync> > > Last State: OpenConfirm Last Event: RecvKeepAlive > > Last Error: Hold Timer Expired Error > > Export: [ IMPORT-LAN-INTO-BGP ] Import: [ Reject-BGP ] > > Options: <Preference LocalAddress AuthKey PeerAS Refresh> > > Options: <AdvertisePeerAs> > > Authentication key is configured > > Local Address: 192.168.111.74 Holdtime: 90 Preference: 170 > > Number of flaps: 30 > > Last flap event: HoldTime > > Error: 'Hold Timer Expired Error' Sent: 30 Recv: 0 > > Peer ID: xx.xx.xx.xx Local ID: xx.xx.xx.xx Active Holdtime: 90 > > Keepalive Interval: 30 Group index: 0 Peer index: 0 > > BFD: disabled, down > > Local Interface: reth2.0 > > NLRI for restart configured on peer: inet-unicast > > NLRI advertised by peer: inet-unicast > > NLRI for this session: inet-unicast > > Peer supports Refresh capability (2) > > Stale routes from peer are kept for: 300 > > Peer does not support Restarter functionality > > Peer does not support Receiver functionality > > Peer does not support LLGR Restarter or Receiver functionality > > Peer supports 4 byte AS extension (peer-as 9541) > > Peer does not support Addpath > > Table inet.0 Bit: 10000 > > RIB State: BGP restart is complete > > Send state: in sync > > Active prefixes: 31 > > Received prefixes: 37 > > Accepted prefixes: 36 > > Suppressed due to damping: 0 > > Advertised prefixes: 48 > > Last traffic (seconds): Received 28 Sent 10 Checked 58 > > Input messages: Total 80 Updates 30 Refreshes 0 Octets > 2749 > > Output messages: Total 64 Updates 5 Refreshes 0 Octets > 1618 > > Output Queue[0]: 0 (inet.0, inet-unicast) > > > > > > <https://www.avast.com/sig-email?utm_medium=email&utm_ > source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> > Virus-free. > > www.avast.com > > <https://www.avast.com/sig-email?utm_medium=email&utm_ > source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> > > <#m_-4192711485207260329_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
