Slight correction:

There are three states for the fpc/pic/port channel-speed setting
<no value > - This auto negotiates (and very poorly at that)
10g - This forces the qfx to expect four 10G links. (i.e. xe-0/0/49:0, 
xe-0/0/49:1 etc.)
disable-auto-speed-detection - This forces the qfx to expect a 40G link.

Jonathan

________________________________
From: juniper-nsp <[email protected]> on behalf of Jonathan 
Call <[email protected]>
Sent: Thursday, February 8, 2018 2:28 PM
Cc: [email protected]
Subject: Re: [j-nsp] Channelizing a 40GbE port

I thought that only controlled the overall speed of the port. But apparently it 
forces it to a breakout mode.  Cool. Thanks.


It seems a best practice is to disable auto-channelization and then force the 
10g speed for any breakout?


Jonathan


________________________________
From: Jason Healy <[email protected]>
Sent: Thursday, February 8, 2018 1:29 PM
To: Jonathan Call
Cc: [email protected]
Subject: Re: [j-nsp] Channelizing a 40GbE port

On Feb 8, 2018, at 10:46 AM, Jonathan Call <[email protected]> wrote:
>
> Juniper has instructions on how to disable auto-channelization on the QFX 
> series, but there doesn't appear to be a way to force (or even encourage) 
> channelization. I have a qfx5100-48t with a QSFP-40G-SR in port 48 and a 
> MTP-4xLC breakout cable connected to a couple of servers. The qfx5100-48t 
> just can't/won't figure out the fact that I want it to channelize.


This is ringing a bell... judging from the comment in my config, have you tried 
this:

chassis {
    fpc 0 {
        pic 0 {
            /* Must explicitly set speed for fan-out interfaces to be 
recognized */
            port 48 {
                channel-speed 10g;
            }
        }
    }
}


Jason
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
juniper-nsp Info Page - 
puck.nether.net<https://puck.nether.net/mailman/listinfo/juniper-nsp>
puck.nether.net
To see the collection of prior postings to the list, visit the juniper-nsp 
Archives. Using juniper-nsp: To post a message to all the list members ...



_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to