What is even more misleading is that the MX accepts the transit
configuration and commits without warnings. I issued the commit on a
standalone router but tomorrow I'm going to setup a lab with 3 routers.

Some docs mention that MPC-only chassis like the MX80 come with CNHs
configured as the default, but that's only true for ingress EVPN.

I'm still confused :-)

Luis

On Sun, 11 Feb 2018 at 19:56 Olivier Benghozi <olivier.bengh...@wifirst.fr>
wrote:

> Hi Luis,
>
> I already wondered the same thing, and asked to our Juniper representative
> ; the answer was that each family supports (and only supports) its specific
> CCNH flavour:
> CCNH for ingress: MX
> CCNH for transit: PTX (I didn't asked for QFX10k).
> Olivier
>
> > On 10 feb. 2018 at 19:17, Luis Balbinot <l...@luisbalbinot.com> wrote :
> >
> > I was reading about composite chained next hops and it was not clear to
> me
> > whether or not MX routers support them for transit traffic. According to
> > the doc bellow it's only a QFX10k/PTX thing:
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to