You just need to locate and clear whatever is causing the loop, that’s the 
solution right?

-SH

> On Feb 23, 2018, at 6:15 AM, Brijesh Patel <brju.pa...@gmail.com> wrote:
> 
> Hi Scott,
> 
> Issue is similar but there is no solution ? Or not on juniper website which 
> mention in that blog.
> 
> So lost
> 
> 
> Thanks
> 
> Brijesh 
> On Friday, February 23, 2018, Scott Harvanek <scott.harva...@login.com 
> <mailto:scott.harva...@login.com>> wrote:
> https://puck.nether.net/pipermail/juniper-nsp/2014-November/029561.html 
> <https://puck.nether.net/pipermail/juniper-nsp/2014-November/029561.html>
> 
> > On Feb 22, 2018, at 10:37 PM, Nikolas Geyer <n...@neko.id.au 
> > <mailto:n...@neko.id.au>> wrote:
> >
> > You’ve probably got a layer 2 loop in your topology somewhere. OSPF 
> > probably went down due to the RE CPU utilization going through the roof.
> >
> > Sent from my iPhone
> >
> >> On 22 Feb 2018, at 11:23 pm, Brijesh Patel <brju.pa...@gmail.com 
> >> <mailto:brju.pa...@gmail.com>> wrote:
> >>
> >> Hello Friends,
> >>
> >> We have switch EX4300 which is connected to EX4500. .
> >>
> >> Receving an erroe message : *2ald[1299]: L2ALD_MAC_MOVE_NOTIFICATION: MAC
> >> Moves detected in the system*
> >>
> >> *and system went down and ospf flap . ANy idea ?*
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp@puck.nether.net 
> >> <mailto:juniper-nsp@puck.nether.net>
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp 
> >> <https://puck.nether.net/mailman/listinfo/juniper-nsp>
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp@puck.nether.net 
> > <mailto:juniper-nsp@puck.nether.net>
> > https://puck.nether.net/mailman/listinfo/juniper-nsp 
> > <https://puck.nether.net/mailman/listinfo/juniper-nsp>
> 

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to