❦ 29 mars 2018 15:36 +0100, <[email protected]> :
> Ok so you have the FIB level load-sharing enabled
> Do you have BGP multipath configured with the multiple-as option too?
> set protocols bgp group foo123 multipath multiple-as
>
> -Though from the outputs it seem like everything is set up right.
> You have the same metric2 (cause ebgp) so should be fine.
> And the next-hop is copied form the inactive route to active one.
I am using iBGP, so everything comes from the same AS. Each neighbor is
a route reflector distributing a distinct set of routes. I have tried to
add multiple-as nonetheless, but no change.
The good news is that half of the VTEP are using one next-hop and the
other half the others one. If I put down a BGP session and back, the
next hops are still distributed over the sets of VTEP. This is not
ideal, but this enough for my situation.
--
Go not to the elves for counsel, for they will say both yes and no.
-- J.R.R. Tolkien
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
