Saku, just forgot When we use l2circuits, you remove some layer of routing protocol troubleshooting. In just few command you know what’s going on.
In a flap, BGP session will be dropped after timers reached. RSVP/ISIS/LDP will be affect immediately. Also ISIS is the fundamental key of everything over here.... With BGP, you have to check everything twice, including filters everywhere if someone change this or change that. att Alexandre Em 7 de jul de 2018, à(s) 17:16, Mark Tinka <mark.ti...@seacom.mu> escreveu: > > > On 7/Jul/18 18:03, Alexandre Guimaraes wrote: > >> Yes! But... Ex4550 we have 32 ports 1/10Gb, using expansion slots, more >> 1/10Gb or 40Gb ports. L2circuits, QinQ L2TP, vlan translation, rtg >> local-interface switching and so on... >> >> We eat 1/10Gb ports, ASR920 didn’t help us with that. > > Agreed - the ASR920 lacks port density. But, it does have the features, which > come at a decent price. > > Depending on how things pan out with Broadcom in the few short years to come, > I think this will be a particularly good area for Arista to pick all their > competitors off, should they come right with their IP/MPLS software > implementations. > > I feel the established/traditional equipment vendors are too busy producing > half-baked Broadcom-based solutions just to have a "cheap" option to deal > with customers considering Arista or white boxes; and focusing more on > pushing their heavily-bloated "data centre" switches at massive $$ premiums. > Slowly but surely, Arista (or anyone else copying their model) will rise to > fill the gap. > > Mark. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
