Dear Colleagues,
I've encountered an odd problem with adding EX4200s (running 12.3R6.6)
to Virtual Chassis with a nonprovisioned configuration file.
According to documentation, I zeroize the second switch, power it off,
connect to the running switch and power it on. Some magic happens, and
voila:
> show virtual-chassis
Virtual Chassis ID: 915f.3bb3.ff60
Virtual Chassis Mode: Enabled
Mstr Mixed Neighbor List
Member ID Status Serial No Model prio Role Mode ID Interface
0 (FPC 0) Prsnt BM0213317561 ex4200-24t 128 Master* N 1 vcp-0
1 (FPC 1) Prsnt BM0217040019 ex4200-24t 128 Backup N 0 vcp-0
Member ID for next new member: 2 (FPC 2)
Looks fine, doesn't it? However, if I later poweroff the Backup switch
(BM0217040019), the current Master switch (BM0213317561) goes into linecard
(sic!)
mode! And I lose ssh access to it. I can undo the disaster only from the
serial console.
What am I doing wrong? Or if it's a bug, is there a workaround?
--
Victor Sudakov, VAS4-RIPE, VAS47-RIPN
AS43859
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
