On Thu, Jul 26, 2018 at 05:35:42PM -0400, Chuck Anderson wrote: > Ask your Juniper rep for a feature that Cisco calls "WAN MACsec".
Juniper calls it MACsec. The OP probably needs to make sure the firmware is correct for his platform. https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/macsec.html MACsec is also a licensed product. Make sure the switches were ordered with the EX-QFX-MACSEC-ACC3 license. > On Thu, Jul 26, 2018 at 11:01:37PM +0200, james list wrote: > > Dear experts, > > I have a virtual chassis of ex4300 connected to another vc of ex4300 with 2 > > x 1 Gbs links provided by two carriers. > > > > Lacp aggregation is up with just one carrier1 link encrypted with macsec, > > unfortunately carrier2 is not going to find the problem and macsec packet > > are not transported. > > > > I sent them the 802.1ae standard and ethertype to transport but no way. > > > > As far as I could understand they have Huawei devices. > > > > Do you have any suggestion for me to let them verify? > > > > Cheers > > James > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp