You can selectively disable stateful processing using firewall filters but you can't combine stateful and mpls for a given packet except with recirculation.
пт, 24 авг. 2018 г., 20:09 Aaron Gould <[email protected]>: > Is that true? I was wondering if stateful mode does no mpls at all. I was > recently wondering if I could use a Juniper SRX firewall in its purest > firewall form, I think known as stateful mode, with MPLS encapsulation and > services terminating directly inside of the SRX > > Let me know , thanks > > Aaron > > > On Aug 24, 2018, at 10:12 AM, Pavel Lunin <[email protected]> wrote: > > > > In stateless mode — as much as the cpus and ram can accommodate. > > Performance and scaling should be somewhat near the IP packet-mode > numbers, > > and most major features are there. > > > > In stateful mode — zero, if I didn't miss something. > > > > пт, 24 авг. 2018 г., 16:31 Alain Hebert <[email protected]>: > > > >> Curious to know. > >> > >> The commands are there... Most of the things seems functional up > >> to LDP. > >> > >> Have a good day. > >> > >> -- > >> ----- > >> Alain Hebert [email protected] > >> PubNIX Inc. > >> 50 boul. St-Charles > >> P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 > >> Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443 > >> > >> _______________________________________________ > >> juniper-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
