I perfectly knows the path, there is no qos configured and from what is seen there is no congestion (also because congestion cannot happen just only 30 minutes) and I do not have a tap on each cable, also there are port channels...
Il Gio 4 Ott 2018, 20:58 Richard McGovern <rmcgov...@juniper.net> ha scritto: > It does not. > > > > Do you know if delay if from QFX5100 or MX or both? Do you know what > Queue this traffic is going into on each switch/router? > > > > *From: *james list <jameslis...@gmail.com> > *Date: *Thursday, October 4, 2018 at 2:34 PM > *To: *Richard McGovern <rmcgov...@juniper.net>, Juniper List < > juniper-nsp@puck.nether.net> > *Subject: *Re: [j-nsp] Traffic delayed > > > > Due to the fact that access switch are QFX5100 in virtual chassis, does > anybody know if IS-IS managing virtual- chassis has something happening > every 30 minutes which could cause delay? > > > > Cheers > > > > Il Mar 2 Ott 2018, 21:33 Richard McGovern <rmcgov...@juniper.net> ha > scritto: > > There is no such product as an MX9K. Is your product some form of MX or an > EX9200 of some type? > > In either case would need to know which exact modules within the MX or EX > product you are using or are involved. > > When using the CAT6K was the edge QFX5100 previously as well? I assume > QFX5100 is just L2? > > > > Sent from my iPhone > > > On Oct 2, 2018, at 12:37 PM, james list <jameslis...@gmail.com> wrote: > > > > Dear experts > > > > I’ve a strange issue. > > > > Our customer replaced two L2/3 switches (C6500) where a pure L2 and L3 > > (hsrp) environment was set-up with a couple of new MX9k running the same > L2 > > and L3 services but those two MX are running MPLS/VPLS to transport L3/L2 > > frames. Access switches are QFX5k connected to MX MPLS PE. > > > > Now the main issue: the customer every almost 30 minutes (sometimes 28 > > sometimes 33 minutes sometimes 30) detect some frames received with a > delay > > of 3-600 milliseconds. The customer is a trading venue.. > > > > It seems like something slow down the forwarding processing, now I know > > Juniper separate forwarding and control, but I was thinking to OSPF LSA > > refresh or something like that since the frequency is around 30 minutes.. > > > > Can anybody help me in sorting out which can be the main point here ? > > > > Thanks in advance > > > > Cheers, > > > > James > > > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp