Yeah I’m not sure about how to do QinQ https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/vlan-double-tagging-with-l3-interface.html
Aaron > On Oct 6, 2018, at 1:37 PM, Robert Hass <robh...@gmail.com> wrote: > > l2circuit configuration on r03 is fine. I just made mistake putting post on > j-nsp. > Why should I push and pop on R03 ? See that QinQ (so adding second dot1q tag) > is done on catalyst switch. > >> On Sat, Oct 6, 2018 at 3:07 PM Aaron1 <aar...@gvtc.com> wrote: >> And if that doesn’t work, you might need to push and pop on the R03 side... >> >> ...also, is customer sending you 300 tagged frames on r01? If not then I >> don’t think you should tag and push and pop there on r01 Uni port >> >> Aaron >> >> > On Oct 6, 2018, at 8:03 AM, Aaron1 <aar...@gvtc.com> wrote: >> > >> > At least fix this on r03... >> > >> > interface xe-0/0/0.300 >> > Should be ... >> > interface xe-0/0/1.300 >> > >> > Aaron >> > >> >> On Oct 6, 2018, at 2:19 AM, Robert Hass <robh...@gmail.com> wrote: >> >> >> >> interface xe-0/0/0.300 >> > _______________________________________________ >> > juniper-nsp mailing list juniper-nsp@puck.nether.net >> > https://puck.nether.net/mailman/listinfo/juniper-nsp >> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp