Check CoS config and the Mpc you are using. Is there fusion in the picture?
> On 23 Oct 2018, at 07:55, Enoch Nyatoti via juniper-nsp > <[email protected]> wrote: > > Hi, > Do you have a loopback filter with icmp rate limiting on the MX router? If so > try to deactivate and test. > > Best regards > E.N. > > > > On Monday, October 22, 2018, 10:21:57 PM GMT+2, john doe > <[email protected]> wrote: > > I talked to my supplier and they say that there is no MTU settings or > limitations on their wavelength service. I have other wavelengths from the > same supplier that works as expected so maybe it's not on their end. > > Johan > >> On Mon, Oct 22, 2018 at 8:10 AM Mikael Abrahamsson <[email protected]> wrote: >> >>> On Mon, 22 Oct 2018, john doe wrote: >>> >>> The setup is a Cisco on one side and a MX one the other. Between them >> are a >>> 10G wavelength. MPLS, RSVP is running and the ERO of my LSP is taking the >>> >>> What could cause the Low MTU? >> >> My guess is that it's actually not a "wavelength" but someones packet >> network in between and they're just calling it a "wavelength". So call the >> "wavelength" provider and ask them what MTU they support. >> >> -- >> Mikael Abrahamsson email: [email protected] >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
