Agree 100%.  If you need L3 for 1GE edge, no solution today.  That solution 
(late 1H2019 or 2H2019) will come with EVPN/VXLAN support on EX4300-MP, from 
what I hear.  If you can get away with just L2 at 1GE edge, than ESI-LAG to any 
L2 Access will work.  Yes you can also use QFX5K Agg running EVPN/VXKLAN and 
then connect 1GE platform (via ESI-LAG) to it.

For question is need or beneficial to interconnect at edge, can be done, but 
not really beneficial as EVPN/VXLAN TOR or Agg are always 1 Hop away anyway.  
Hopefully this makes sense to you.

Regards

Richard McGovern
Sr Sales Engineer, Juniper Networks 
978-618-3342
 

On 11/6/18, 1:39 PM, "Saku Ytti" <[email protected]> wrote:

    Hey Richard,
    
    I think there are two separate issues here. Lot of people looking at
    Fusion aren't choosing it for technology, they are choosing it for
    media, as 1GE L3 ports are not available. So options are
    
    a) L2 aggregation
    b) Fusion
    c) Wait for JNPR to release some MX244 with 4xQSFP28 + 40xSFP+ box,
    which has attractive pay-as-you-go for 1GE deployments.
    
    I'm sure there is another set of problems where EVPN and Fusion are
    competition options, but for service providers fusion's value proposal
    mainly is low rate ports, ports which Cisco and Juniper do not really
    offer anymore on L3 devices.
    
    
    On Tue, 6 Nov 2018 at 19:21, Richard McGovern <[email protected]> wrote:
    >
    > I might suggest you look at an EVPN based design instead.  This is going 
to be Juniper's #1 go to in the future.  I believe things like Junos Fusion and 
MC-LAG, etc. may still be supported, but secondary to EVPN and associated 
features.
    >
    > What is your planned SD devices?  QFX5???
    >
    > Richard McGovern
    > Sr Sales Engineer, Juniper Networks
    > 978-618-3342
    >
    >
    > On 11/5/18, 8:32 PM, "Eldon Koyle" <[email protected]> 
wrote:
    >
    >     What kind of experiences (good or bad) have people had with Juniper's
    >     Fusion Provider edge?  Are there any limitations I should be aware of?
    >
    >     I'm looking at it to simplify management in a campus network 
environment
    >     and to use features that are only available on the MX currently.
    >
    >     --
    >     Eldon
    >     --
    >     I don't think the universe wants me to send this message
    >
    >
    >
    > _______________________________________________
    > juniper-nsp mailing list [email protected]
    > 
https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_juniper-2Dnsp&d=DwIFaQ&c=HAkYuh63rsuhr6Scbfh0UjBXeMK-ndb3voDTXcWzoCI&r=cViNvWbwxCvdnmDGDIbWYLiUsu8nisqLYXmd-x445bc&m=GYWKMgRXDrXnz5JPzE5vBSJ8ek1KgPgJWwzkXriKaoE&s=8lXeaBloqUMJgy5C1smX8ri4S5BQ9PN7qGX4OczJZus&e=
    
    
    
    -- 
      ++ytti
    

_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to