It's been quite a few years since I have looked at 10GBASE-T but the options I explored boiled down whether to buy Cu switches, or just use SFP+ NICs in the servers and then use DAC or transceivers. I chose the latter, and the only Cu interfaces on servers are DRAC / ILO and 1GbE.
Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> On Mon, 3 Dec 2018 at 08:14, Jared Mauch <[email protected]> wrote: > You need some extra electronics for the copper phy support. I don’t know > if the 4550 has that. > > Jared Mauch > > > On Dec 2, 2018, at 12:36 PM, ML <[email protected]> wrote: > > > > Having trouble finding concrete information on if EX-SFP-10GE-T will > work in an EX4550? Officially it doesn't look like Juniper says it's > supported. > > > > I recall when 10G Copper SFP+ were coming to market they had thermal and > power budget issues that made them possibly not usable on certain platforms. > > > > Is that no longer the case with SFP-GE-Ts sold today? > > > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
