Subscriber Management will allow for RADIUS and DHCP options to map to services or package profiles. For example, VLAN tag combo X gets package Y which is rate limited to 250Mbps and Z number of DHCP leases.
The "day 1" guide for Subscriber Management (aka BNG) is quite extensive. Make sure to roll at least JunOS 15.1 or newer - Juniper did a major rewrite a few years ago. --Matt On Thu, Nov 29, 2018, 9:41 AM Matthew Crocker <[email protected] wrote: > > Hello, > > I currently have 4 MX480s (RE-S-2X00x6) running my core network and I’m > looking to manage about 20k FTTH residential subscribers. The customers > are running DHCP clients (Calix ONT, Netgear residential router). What > are my options for managing each DHCP request in JunOS would the subscriber > management feature set help? On my old Redback gear I could do Client > Less IP. I want to be able to support v4 (I have enough v4 for 20k subs) > and v6. Customers will be groomed into multiple 10G interfaces over VLANs. > > The MX480s REs have spare CPU cores and RAM, not sure if I could run > another VM on the RE to support customer management. I’m also looking at > getting a couple new MX204s to support the subscribers and leave my MX480s > to core MPLS/BGP router work > > Thanks > > -Matt > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
