Sending with correct subject-line.
> On 30 Dec 2018, at 4:59 pm, Amarjeet Singh <[email protected]> wrote: > > > I do agree with Emille, feel free to hit provide feedback for documentation. > > I would recommended to disable periodic-refresh for BBE. > There is KB which explains this. > > https://kb.juniper.net/InfoCenter/index?page=content&id=KB27474 > <https://kb.juniper.net/InfoCenter/index?page=content&id=KB27474> > > set accounting-options periodic-refresh disable > > Periodic-refresh is disabled to change the default behavior for statistics > collection. Before Broadband Edge (BBE), statistics were constantly collected > by Junos. This consumes CPU cycles that are needed by BBE for call setup. So, > an option to only collect statistics on demand was needed. Disabling periodic > refresh makes the change in statistics collection to on demand. There is no > negative impact to statistics accuracy or rate when set this way. > > Br, Amarjeet > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
