Are you sure your tester is capable of generating that volume of traffic? Dave
On Mon, 21 Jan 2019 at 20:09, Jason Lixfeld <[email protected]> wrote: > Hi all, > > I’m doing some RFC2544 tests through an MX204. The tester is connected to > et-0/0/2, and the test destination is somewhere out there via et-0/0/0. 64 > byte packets seem to be getting dropped, and I’m trying to find where on > the box those drops are being recorded. > > I’ve distilled the test down to generating 100 million 64 byte (UDP) > packets to the destination, but the counters on et-0/0/2 read as though > they’ve only received about 76.6% of those packets. > > If I change the test to send 100 million 100 byte packets, the counters on > et-0/0/2 account for all packets. > > I’ve tried looking at various output to find a counter that registers the > missing packets, but I’m not having any luck. > > Aside from 'show interface et-0/0/2 extensive’, I’ve looked here with no > luck: > > show interface queue et-0/0/2 > show pfe statistics traffic detail > show pfe statistics exceptions > show pfe statistics error > > Somewhere else I should be looking? > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
