Circling back on some older threads... I'm doing this because I've been growing my cgnat environments and needing to remind myself of somethings, etc...
Regarding MS-MPC-128G being used for napt-44 (nat overload ipv4 savings) what do you all know about throughput ? I understand that it may not be an exact number... but is there a general nat/napt-44 throughput number associated with the ms-mpc-128g ? I've seen numbers ranging from ~7.5 gbps per npu so ~30 gbps total (x4 with 4 npu's per ms-mpc) ... to other numbers like 150 or 160 gbps in a certain slide/document speaking of scp chipset sx or fx... ...i may have misread somethings, but let me know what y'all know about the capabilities of the ms-mpc-128g inside an MX960 as it pertains to napt-44 -Aaron -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of harbor235 Sent: Saturday, March 18, 2017 12:24 PM To: Juniper List Subject: [j-nsp] multi services cards - MX My google-fu is preventing me from finding performance data on the various MS-MPC linecards for the MX router series. I am looking for IPSEC capabilities e.g. max tunnels, max bandwidth per tunnel, etc ... Different versions of the ms-mpc support different performance and tunnel sizes? Can anyone point me to a good reference url? Mike _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp