Hi,
it matters for us, because I want to know the root cause of the red alarm LED
when powering it down with an enabled management port.
Kind regards
Am Donnerstag, 14. Februar 2019, 13:12:13 MEZ hat Anderson, Charles R
<[email protected]> Folgendes geschrieben:
Why does it matter since the switch is halted/powered off anyway?
On Thu, Feb 14, 2019 at 08:31:43AM +0000, Giovanni Bellac via juniper-nsp wrote:
> Hi,
> we are issuing the command (request system power-off) when the switch is
> booted up normally. We are experiencing this on different JunOS versions
> (14.1, 17.3, 18.1).
> From our last email:
> Short update:We experiencing the red alarm only when the management port is
> connected when powering off the QFX5100-48T - weird...When the management
> port is not connected when powering down the device, there is no red alarm.
> Kind regards
>
>
> Am Mittwoch, 13. Februar 2019, 16:22:59 MEZ hat Anderson, Charles R
><[email protected]> Folgendes geschrieben:
>
> On Wed, Feb 13, 2019 at 11:08:16AM +0000, Giovanni Bellac via juniper-nsp
>wrote:
> > after powering off a QFX5100-48T (request system power-off) the fans are
> > spinning down and the ALARM LED is lightning red. The switch is working and
> > looking as expected without any error messages.
> >
> > Is this a normal behavior ? Has someone a spare unit for a short test ?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
