Page 6 of the SRX300 series datasheet states in the fineprint; 16* "Throughput numbers based on UDP packets and RFC2544 test methodology."
That said, I don't see RFC2544 generation and reflection explicitly stated anywhere, nor do I see the config syntax supported up to 15.1X49-D160.2 Juniper KB shows ACX and MX as supported platforms, so perhaps you could create a loopback on the SRX, or do your tests between routing-instances on the MX. -----Original Message----- From: juniper-nsp [mailto:[email protected]] On Behalf Of Matthew Crocker Sent: Wednesday, April 17, 2019 7:05 AM To: [email protected] Subject: [j-nsp] RFC2544 on Juniper SRX300 Hello, I have a customer WAN with 20ish SRX300s & 1 MX80 connected and need to setup RFC2544 to prove out the WAN circuits. Is RFC2544 supports on the SRX in later JunOS versions? I don’t want to go through the process of upgrading the OS and not get access to the feature. Current versions running. Model: srx300 Junos: 15.1X49-D140.2 JUNOS Software Release [15.1X49-D140.2] Model: mx80 Junos: 15.1R6.7 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
