❦ 1 juillet 2019 16:38 +02, Guillermo Fernando Cotone <[email protected]>:
> Does anyone have implemented BGP attribute propagation using EVPN route > type-5? > We're trying to get BGP community propagation over an EVPN L3VNI, but so > far we had no luck. I've no idea if there's any knob to enable this. > > Our use-case is to connect BGP islands through an EVPN backbone, and we > expect BGP attributes, such as communities, to be propagated over the > backbone. Pretty much standard IP-VPN behavior. Also referenced here: > https://tools.ietf.org/html/draft-rabadan-sajassi-bess-evpn-ipvpn-interworking-02#section-4.2 > > I'm not sure if this is actually supported on Juniper. We're > running 17.3R3-S2.2. We didn't had any luck either with 18.1R3-S5 on QFX. I didn't push the issue to JTAC as we have found another way to implement what we wanted. -- He jests at scars who never felt a wound. -- Shakespeare, "Romeo and Juliet, II. 2" _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
