Hi All,
I’m toying around with some QFX10008’s in a customer PoC.
Having some issues with sFlow and can’t find proper documentation in regards to
this.
I’m trying to get sFlow samples from ae/LAG’s.
According to documentation:
• You cannot configure sFlow monitoring on a link aggregation group
(LAG), but you can configure it individually on a LAG member interface.
ae22 is transporting some L3 subinterfaces with vlan tags
ae22 consists of:
et-0/0/1
et-1/0/3
In the ’set protocols sflow interfaces’ you have to put the logical (.0/.xxx)
interface.
In the autocomplete of ’set protocols sflow interfaces’ I found out that the
member interfaces of ae22 are listed together with the logical L3 subinterfaces.
For example:
et-0/0/1.511
et-0/0/1.513
et-0/0/1.514
and
et-1/0/3.511
et-1/0/3.513
et-1/0/3.514
I would assume I should just enable sflow for all these member subinterfaces.
This works fine with 1 L3 subinterfaces enabled, however when I want to add
multiple I get the following error:
[edit protocols sflow]
'interfaces et-0/0/1.511'
only one ifl is allowed
error: configuration check-out failed
Is this a license limitation? Or am I doing something wrong? Would be a bit
weird if an interface can only sample sFlow for a single L3 subinterface.
Thanks in advance,
Tim
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
