Hello, I'm currently looking at physical interface damping on Juniper MX:
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/interfaces-damping-longer-physical-interface-transitions.html Fun Fact: Nowhere on this site is it mentioned that the penalty added per interface down event is 1000. Currently testing this: set interfaces xe-5/2/1 damping half-life 30 set interfaces xe-5/2/1 damping max-suppress 20000 set interfaces xe-5/2/1 damping reuse 1 set interfaces xe-5/2/1 damping suppress 500 set interfaces xe-5/2/1 damping enable So this seems to be working but I'm basically missing two things: 1) Where can I see the *current* penalty on the interface? "show interface extensive" only lists the configured parameters and the state (suppressed/unsuppressed) of the interface: Damping : half-life: 30 sec, max-suppress: 20000 sec, reuse: 1, suppress: 500, state: suppressed 2) Is there a way to manually clear the interface / reset the penalty so that it comes up immediately? Has anyone used this and can answer these? Is this even possible? Any other experience you want to share regarding this feature? Sebastian -- GPG Key: 0x58A2D94A93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
