Hardware wise I would go with at least QFX5110-48S, then you have 4x1000Gbps uplinks, but even better go with QFX5120-48Y for 8x100G uplinks. Also, don't use VC or MC-LAG unless you really must. Instead use EVPN-VXLAN to provide multihoming, L2 stretch, Anycasted default GW etc etc.
Regards Roger On Sat, Sep 26, 2020 at 1:00 PM james list <[email protected]> wrote: > Dear experts > I have a project to connect at layer2 level 16 servers (two interfaces > each) with a total of 32 x 10Gbs server interfaces in order to setup a big > data solution. > > These interfaces must have in normal conditions full L2 bandwidth available > to transmit among themselves and redundancy of switch (if there is a fault > condition 160 Gbs is enough). > > Since this kind of huge bandwidth requirement could cause bottlenecks in > Datacenter Lan environment I was thinking to setup a separate lan > architecture. > > I was thinking to setup a virtual chassis environment with 2 x qfx5100 with > multiple 40 Gbs interfaces to set vc ports. > > Do you think it's a good architecture or what would you setup? > > Cheers > James > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
