Im aware that the MX80's Flash can get worn out over time. Ive had to replace a few MX80s flashes with a compatible 3rd party USB/Flash to get them back up and running. (yes, voids warranty field-stripping an MX80 to get at the 2 flash modules in the rear area of the motherboard) -- but it worked.
Field strip. Swap the flashes, Boot from USB installer, install JunOS, make a basic fxp0 config, load latest JunOS, push config back from RANCID, and the boxes are back in production and happy. - Ck. > On 3 Feb 2021, at 5:10 am, Righa Sha <[email protected]> wrote: > > Hello, > > I recently had an MX80 router reboot with reason being panic:data storage > interrupt trap. > > Anyone come across such an issue and get to resolve.Any assistance would be > greatly appreciated. > > Regards, > Righa > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
