I would expect to have some kind of encapsulation on the interface. eg; set encapsulation flexible-ethernet-services
-----Original Message----- From: jayshankar nair [mailto:[email protected]] Sent: Thursday, April 08, 2021 5:46 AM To: [email protected] Subject: vlan-tagging on ospf interface Hi, I have ospf interface ge-0/0/3 on peer routers. I am able to ping from one router to other when vlan-tagging is not enabled. When i enable the vlan-tagging on peer interface. I am unable to ping. Below is the vlan tagged enable configuration. Also the interface is added to ospf protocol OSPF-MultiArea jcluser@vMX1# show vlan-tagging;unit 600 { vlan-id 600; family inet { address 10.100.12.1/24; }}------------------------------ jcluser@vMX2# show vlan-tagging;unit 600 { vlan-id 600; family inet { address 10.100.12.2/24; }}Please let me know if the configuration is right. Thanks,Jayshankar _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
