--- Begin Message ---
Hi all,
I am using a QFX5100 2-member-VC as a L2 gateway in a centrally routed
EVPN/VXLAN setup. It seems that the VC redundancy does not work in this
configuration properly. For test purposes I am promoting the backup-RE as
master-RE and afterwards restarting the old master-RE (now backup-RE). While
restarting the backup-RE member the connection to the servers is always lost.
The servers are connected to both members via LACP.
I have tried several JunOS versions (21.1.R1, 20.4R2-S2, 20.2R2-S3, 19.4R3-S3)
but the results are always the same.
Any suggestions to get this work as intended?
Kind regardsGiovanni
--- End Message ---
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
