Yeah,
We (and some of my customers CTOs) always created parallel Labs.
If you think about it, you *should* already have the spare parts
required for production, using them in the Lab enabled us to insure:
. They are in working condition;
. They are readily available to provision production/bootstrap
configuration in case of emergency;
. We won't take down our world while goofing around =D.
( Yes, we do not have a complete MX960 in the lab... But we're
running an older MX240, or MX104, yadi yada )
-----
Alain [email protected]
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911http://www.pubnix.net Fax: 514-990-9443
On 11/3/21 11:53, harbor235 via juniper-nsp wrote:
Hi all,
Anybody out there integrating production environments (real-time service
delivery), test, and development labs into a single architecture? I do not
like this idea if it is avoidable. I understand supposed savings, but the
cost of an unplanned event negates the implied savings.
thoughts?
Mike
_______________________________________________
juniper-nsp mailing [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
