Have nothing directly related to these releases, but we have a few
SRX320 and they always felt slow in comparison to SRX345 that we also
use mainly for power supply redundancy. Now they are all on 19.4R3-Sx.
320s time to time log LACP timeouts and ae interface flaps. 345s have
the same configuration and never experienced anything like this.
Kind regards,
Andrey
Markus via juniper-nsp писал(а) 2022-07-12 17:16:
Hi list,
I'm moving a couple SRX300 that were running 15.1X49-D90.7 to a new
purpose and just updated them to 21.3R1.9 to be a bit more up-to-date
and now booting takes twice the time (5 mins?) and CLI input also
seems "lag-ish" sometimes. Did I just do a big mistake? If
routing/IPsec is unimpacted then it's OK, or could it be that the
SRX300 will now perform slower than before in terms of routing
packets/IPsec performance/throughput? Or is that stupid of me to
think? :)
Thank you!
Regards
Markus
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
