Hi Daniel, Have you checked IF the device model in question is capable of running in "standalone" mode? As far as I remember there were models which did not support it (especially the ones used for IC in a jnp qfabric).
Best regards, Vincentz -- Am 04.02.2023 um 23:21 schrieb Daniel Roesen via juniper-nsp <[email protected]>: Hi, just trying to convert a couple of QFX3600 QFabric interconnet nodes to standalone mode via "request chassis device-mode standalone". They state "after next boot: standalone", but come up again in QF-IC mode, still stating "after next boot: standalone". JUNOS 13.1X50-D15.1 The conversion worked sorta fine with the QFX3500s, but all QFX3600 do fail... Anybody got a clue how to beat them into submission? Best regards, Daniel -- CLUE-RIPE -- Jabber: [email protected] -- dr@IRCnet -- PGP: 0xA85C8AA0 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
