Looks like there's no "set chassis pic ..." anything on this. The only thing close, "set chassis fpc 0 pic 0 ..." is for turning the modular PIC (like on the EX4200) between 1G and 10G mode, but not individual ports.
Once upon a time, Chuck Anderson <[email protected]> said: > Not sure, but if there is a way, it might be configured under "set chassis > pic ...", perhaps something like this: > > sst chassis pic fpc-slot 0 pic-slot 1 port 0 speed 10g > > > On Mon, Feb 13, 2023 at 09:23:10AM -0600, Chris Adams via juniper-nsp wrote: > > I have an old Juniper EX4500 (working on replacing it), and some > > FiberStore 10G/1G SFP+ modules (SFP-10GSR-85). When I put the SFP+ in > > the EX, it sees it as a 1G module (so interface ge-0/0/X), but the other > > end is 10G. Is there a way to force the EX end to 10G with the > > multirate SFP+? I see set ether-options speed, but it'll only go to 1g > > on the ge-foo interface; I can set xe-foo ether-options speed 10g but it > > is ignored (since the EX doesn't think it has an xe-foo interface). > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Chris Adams <[email protected]> _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
