*try below and do to upgrade again.* *deactivate system services ssh ciphers *
*Regards,* *Aamir* On Thu, Nov 9, 2023 at 12:28 PM Andreas S. Kerber via juniper-nsp < [email protected]> wrote: > Anybody successfully updated MX204 from 21.4R3-S4 to 21.4R3-S5? > Got a few MX204 and trying to "request vmhost software add" fails > on each of them. > > Anybody got a hint for me? > > $ request vmhost software add > /var/tmp/junos-vmhost-install-mx-x86-64-21.4R3-S5.4.tgz > Junos Validation begin. Procedure will take few minutes. > Checking if VirtFS can be used for image install ... > Required: 7654536554 bytes Available: 21476761600 bytes > Using VirtFS ... > {...} > Hardware Database regeneration succeeded > Validating against /config/juniper.conf.gz > mgd: commit complete > Validation succeeded > Validating against /config/rescue.conf.gz > mgd: commit complete > Validation succeeded > Verified junos-vmhost-install-mx-x86-64-21.4R3-S5.4 signed by > PackageDevelopmentECP256_2023 method ECDSA256+SHA256 > Copied the config and other data to the aux disk. > Transfer junos-host-upgrade.sh > lost connection > Transfer Done > Starting upgrade ... > sh: /junos/install/junos-host-upgrade.sh: No such file or directory > rm: cannot remove '/junos/install/junos-host-upgrade.sh': No such file or > directory > ... upgrade failed. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
