Hi This is what I have done, but it doesn’t appear to work.
We have had to send to the clients via DHCP a set of /32 host routes to circumvent this problem. I will open a TAC case and raise with my SE to see whats what. Thanks for the feedback. From: Roger Wiklund <[email protected]> Sent: Friday, December 8, 2023 2:25 PM To: Aaron1 <[email protected]> Cc: Jackson, William <[email protected]>; [email protected] Subject: Re: [j-nsp] proxy-arp on EVPN irb ** WARNING: This email originates from outside of the organisation ** Hi It seems that proxy arp is disabled by default: proxy-arp | Junos OS | Juniper Networks<https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/ref/statement/proxy-arp-edit-interfaces.html> Regarding proxy-arp for EVPN (arp suppression) it only works for the same subnet, not between subnets. So that seems to match what you're seeing that you must enable proxy-arp on the IRB in order to reach the other subnets. Regards Roger On Wed, Dec 6, 2023 at 5:04 PM Aaron1 via juniper-nsp <[email protected]<mailto:[email protected]>> wrote: As I recall, proxy-arp behavior is proven by looking in the local host arp cache and finding entries for foreign ip’s mapped to the default gateway’s mac address. If that is still occurring, then it would seem that proxy arp functionality is still working and you can move on to tshooting something beyond that… like what is the upstream def gw/evpn pe doing with those packets Aaron > On Dec 6, 2023, at 6:16 AM, Jackson, William via juniper-nsp > <[email protected]<mailto:[email protected]>> wrote: > > Hi > > Maybe somebody knows the answer to this one: > > We migrated some customers to an EVPN domain away from a legacy node that > used proxy-arp on its L3 interface. > > The downstream clients have some funky routing and they are relying on > proxy-arp to resolve an offnet address (don't ask me why for our sanities > sake)! > > We have a implemented EVPN bridge domain with the following config on MX PE > nodes running 21.1 code. > > instance-type virtual-switch; > protocols { > evpn { > encapsulation mpls; > default-gateway do-not-advertise; > extended-vlan-list [ 250 ]; > } > } > bridge-domains { > 250 { > domain-type bridge; > vlan-id 250; > interface ae68.250; > routing-interface irb.25068; > } > } > > interfaces irb.25068 { > proxy-arp; > family inet { > address 172.23.248.1/22<http://172.23.248.1/22>; > } > mac 00:aa:dd:00:00:68; > } > > This irb is in a L3VPN instance. > > Now the documentation states that proxy-arp and arp-suppression is on by > default yet these clients cant reach the offnet host with or without the > "proxy-arp" command on the irb. > > Any ideas? > > thanks > _______________________________________________ > juniper-nsp mailing list > [email protected]<mailto:[email protected]> > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
