Yes. I forgot about that option. Thanks for bringing that up. Rich
Richard McGovern Sr Sales Engineer, Juniper Networks 978-618-3342 I’d rather be lucky than good, as I know I am not good I don’t make the news, I just report it Juniper Business Use Only On 1/9/24, 10:47 AM, "Chriztoffer Hansen" <[email protected]> wrote: I can confirm using a QSFP+ to SFP+ adapter works, too. (Lane 0 being wired to the front, lane 1-3 are not used) With the following configuration fpc 0 { pic 0 { /* Set in groups of four, e.g. 0-3, Here 8-11 */ port 8 { channel-speed 10g; } port 9 { channel-speed 10g; } port 10 { channel-speed 10g; } port 11 { channel-speed 10g; } } } With the following type of converter optic. Example - https://urldefense.com/v3/__https://www.fs.com/de-en/products/72582.html__;!!NEt6yMaO-gk!F7CPnpSnZpSXCLUjJg7ZJZW-4EwnnuO6ZEpuqfTNbXUdi7T4_PbDtVrokE_DOROtLHGyiRFKFH70pDnNdKL9rYBk1FIdvyvw$<https://urldefense.com/v3/__https:/www.fs.com/de-en/products/72582.html__;!!NEt6yMaO-gk!F7CPnpSnZpSXCLUjJg7ZJZW-4EwnnuO6ZEpuqfTNbXUdi7T4_PbDtVrokE_DOROtLHGyiRFKFH70pDnNdKL9rYBk1FIdvyvw$> (QSFP+ to 10G SFP+) https://urldefense.com/v3/__https://www.fs.com/de-en/products/178066.html__;!!NEt6yMaO-gk!F7CPnpSnZpSXCLUjJg7ZJZW-4EwnnuO6ZEpuqfTNbXUdi7T4_PbDtVrokE_DOROtLHGyiRFKFH70pDnNdKL9rYBk1LwF-waO$<https://urldefense.com/v3/__https:/www.fs.com/de-en/products/178066.html__;!!NEt6yMaO-gk!F7CPnpSnZpSXCLUjJg7ZJZW-4EwnnuO6ZEpuqfTNbXUdi7T4_PbDtVrokE_DOROtLHGyiRFKFH70pDnNdKL9rYBk1LwF-waO$> (QSFP28 to 25G SFP28) (This is on 5120-32c) On Tue, 9 Jan 2024 at 15:39, Richard McGovern via juniper-nsp < [email protected]<mailto:[email protected]>> wrote: > For 10G support, you need to use a 40G [proper] Optic and channelize this > to 4 x 10G. > > Just FYI. Rih > > Richard McGovern > Sr Sales Engineer, Juniper Networks > 978-618-3342 > > I’d rather be lucky than good, as I know I am not good > I don’t make the news, I just report it > > > > > Juniper Business Use Only > > On 12/29/23, 12:44 PM, "Lee Starnes" > <[email protected]<mailto:[email protected]>> wrote: > Thanks for the info and links Tobias. really helpful. It must just be a > Juniper thing that it supports only 25G because on Cisco and Mikrotik it > supports down to 1G. Anyway, at least I have answers and a solution. > > Best, > > -Lee > > On Fri, Dec 29, 2023 at 1:31 AM Tobias Heister via juniper-nsp < > [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>>> > wrote: > > > Hi, > > > > While it sometimes works to let 25G transceivers run at 10G (depending > > on Transceiver and Device(s)) i think in this case you will need a > > different transceiver. > > > > See e.g. HCT for reference: > > https://apps.juniper.net/hct/product/?prd=QFX5200-32C > > > > the PSM only lists 25 and 100 as being supported: > > https://apps.juniper.net/hct/model/?component=JNP-QSFP-100G-PSM4 > > > > For 10G SM Breakout something like > > https://apps.juniper.net/hct/model/?component=JNP-QSFP-4X10GE-LR would > > be the way to go. > > > > > > regards > > Tobias > > > > Am 29.12.2023 um 02:38 schrieb Lee Starnes via juniper-nsp: > > > Hello everyone, > > > > > > I am running into an issue on our QFX5200 switches where I have > > installed a > > > QSFP-100G-PSM4 optic. This can do 1G/10G/25G on the 4 channels. My > issue > > is > > > that I am not able to get the interfaces to go to 10G even though I > have > > > set them as such. > > > > > > If setting all 4 channels to 10G only a single interface shows at 100G. > > If > > > I set them all to 25G, all 4 show as 25G. Then if I change one of the > > > channels to 10G, all 4 remain as 25G. > > > > > > Is this an issue with how I am setting this up or an issue with the > type > > of > > > Optic being used? Below is the config for the ports in the last state I > > > tested. > > > > > > chassis { > > > fpc 0 { > > > pic 0 { > > > port 0 { > > > channel-speed 10g; > > > } > > > port 1 { > > > channel-speed 25g; > > > } > > > port 2 { > > > channel-speed 25g; > > > } > > > port 3 { > > > channel-speed 25g; > > > } > > > > > > Thanks for any info or documents you can point me to. > > > > > > Best, > > > > > > -Lee > > > _______________________________________________ > > > juniper-nsp mailing list > > > [email protected]<mailto:[email protected]><mailto: > [email protected]<mailto:[email protected]>> > > > > https://urldefense.com/v3/__https://puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!AbnHWywEEDeGUttHzSqPdMr77UVBTZwTxHBmbOc2aX4jAbP3ToR5pp5zbJKE4mWA89WcIYMO_abVAdgp-9LYpIuFQd48K9FI$<https://urldefense.com/v3/__https:/puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!AbnHWywEEDeGUttHzSqPdMr77UVBTZwTxHBmbOc2aX4jAbP3ToR5pp5zbJKE4mWA89WcIYMO_abVAdgp-9LYpIuFQd48K9FI$> > < > https://urldefense.com/v3/__https:/puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!AbnHWywEEDeGUttHzSqPdMr77UVBTZwTxHBmbOc2aX4jAbP3ToR5pp5zbJKE4mWA89WcIYMO_abVAdgp-9LYpIuFQd48K9FI$ > > > > > > > _______________________________________________ > > juniper-nsp mailing list > > [email protected]<mailto:[email protected]><mailto: > [email protected]<mailto:[email protected]>> > > > https://urldefense.com/v3/__https://puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!AbnHWywEEDeGUttHzSqPdMr77UVBTZwTxHBmbOc2aX4jAbP3ToR5pp5zbJKE4mWA89WcIYMO_abVAdgp-9LYpIuFQd48K9FI$<https://urldefense.com/v3/__https:/puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!AbnHWywEEDeGUttHzSqPdMr77UVBTZwTxHBmbOc2aX4jAbP3ToR5pp5zbJKE4mWA89WcIYMO_abVAdgp-9LYpIuFQd48K9FI$> > < > https://urldefense.com/v3/__https:/puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!AbnHWywEEDeGUttHzSqPdMr77UVBTZwTxHBmbOc2aX4jAbP3ToR5pp5zbJKE4mWA89WcIYMO_abVAdgp-9LYpIuFQd48K9FI$ > > > > > > > _______________________________________________ > juniper-nsp mailing list > [email protected]<mailto:[email protected]> > https://urldefense.com/v3/__https://puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!F7CPnpSnZpSXCLUjJg7ZJZW-4EwnnuO6ZEpuqfTNbXUdi7T4_PbDtVrokE_DOROtLHGyiRFKFH70pDnNdKL9rYBk1JLTxfUm$<https://urldefense.com/v3/__https:/puck.nether.net/mailman/listinfo/juniper-nsp__;!!NEt6yMaO-gk!F7CPnpSnZpSXCLUjJg7ZJZW-4EwnnuO6ZEpuqfTNbXUdi7T4_PbDtVrokE_DOROtLHGyiRFKFH70pDnNdKL9rYBk1JLTxfUm$> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
